Search Results
Revvity Sites Globally
Select your location.
*e-commerce not available for this region.
1/4" (6.4 mm) MicroTip Diameter Probe
Ultrasonic Homogenizer microtips are thin, high intensity probes which are designed for processing small sample volumes. Microtips screw into the threaded end of the standard 1/2″ probe 060-500.
For research use only. Not for use in diagnostic procedures.
Product information
Overview
1/4" (6.4 mm) MicroTip Diameter Probe for OM500 Ultrasonic Homogenizer. Microtips are only recommended for short bursts of sonication.
Small volumes heat up very quickly and when a microtip is run continuously both the liquid sample and probe tip will increase in temperature. Microtips should be used in pulse mode and samples chilled for optimum results.
Processing volumes less than 200 µL is not recommended with a microtip. A microtip cannot be properly submerged in such small volumes and will cause foaming, aerosols and overheating.
Specifications
| Diameter |
6.4 mm
|
|---|
| Material |
Titanium
|
|---|---|
| Product Compatibility |
OM 500 sonicator
|
| Quantity |
1
|
| Sample Volume |
5 mL to 50 mL
|
How can we help you?
We are here to answer your questions.
