Explore our solutions
Featured resources
Identifying and resolving the sources of hemacytometer counting error through automation
Practical cell counting method selection to increase the quality of results
Cell counting: Are you using the right method?
Filters
1 - 19 of 19 Products and Services
Ergonomic, high-throughput cell counting plates designed for the Cellaca MX, Cellaca PLX, and Celigo image cytometer.
An easier-to-use cell counting plate with sample and reagent loading wells labeled for pipetting ease, no plate map required.
Ergonomic, high-throughput cell counting plates designed for the Cellaca MX, Cellaca PLX, and Celigo image cytometer.
An easier-to-use cell counting plate with sample and reagent loading wells labeled for pipetting ease, no plate map required.
Cellometer™ Ascend™ slides (3 counting chambers per slide) are standard chamber thickness, accommodating cells from 5 to 80 µm in diameter. Each slide has a protective film on both sides that must be removed before use.
Cellometer™ Ascend™ slides (8 counting chambers per slide) are standard chamber thickness, accommodating cells from 5 to 80 µm in diameter. Each slide has a protective film on both sides that must be removed before use.
15 µm Polystyrene beads in a Trypan blue solution. 4 x 1 ml vials
Cellaca 2-color fluorescent viability check beads. Excepted ratio of green to red beads to determine measured viability is provided in the product insert. Does not replace IQOQ
For use on Cellaca MX and Cellaca PLX. Total of 80 tests. Store at 4°C.
Cellometer Check Validation Bead solution is used by automatic cell counters with two fluorescence channels (Cellometer Auto 2000, K2, X2, and Spectrum instruments) to measure total concentration and viability.
Cellaca brightfield concentration check beads. Total bead concentration is provided on the CoA. Does not replace IQOQ
5 µm Polystyrene beads in a Trypan blue solution. 4 x 1 ml vials
10 µm Polystyrene beads in a Trypan blue solution. 4 x 1 ml vials.
Cellometer SD025 Slides (2 counting chambers per slide). SD025 slides are designed for cells <20 µm in diameter. Each slide has a protective film on both sides that must be removed before use. The SD025 slides are a cost-effective alternative to the ready-to-use PD100 slides.
Cellometer SD100 Slides (2 counting chambers per slide). SD100 slides are standard chamber thickness, accommodating cells from 5 to 80 µm in diameter. Each slide has a protective film on both sides that must be removed before use. The SD100 slides are a cost-effective alternative to the ready-to-use PD100 slides.
Cellaca PLX slides are designed for use with the Cellaca PLX image cytometer. The slide holder, which is included with the instrument, can accommodate 4 slides (8 samples) per experimental run.
Box of 25 manual-count cell counting chambers, good for 50 counts. Disposable, all plastic chambers for manual cell counting with the Improved Neubauer grid pattern. Packed in microscope slide boxes, ready to use.
High-throughput cell counting plates designed for the Cellaca MX, Cellaca PLX, and Celigo image cytometer.
Cellometer PD100 Slides (2 counting chambers per slide). PD100 slides are standard chamber thickness, accommodating cells from 2 to 80 µm in diameter. Each slide is ready-to-use.
High-throughput cell counting plates designed for the Cellaca MX, Cellaca PLX, and Celigo image cytometer.
Cellometer PD300 Slides (2 counting chambers per slide). PD300 slides are larger slides than the standard PD100 slides, accommodating cells >80 µm in diameter.