Homogenizer Accessories
Homogenizers and accessories help countless labs process samples for downstream assays in protein, nucleic acid, and biological molecule detection. Homogenizer accessories open the range of supported samples – whether sample type, sample hardness, sample viscosity, or sample volumes – so that one unit can make an impact on multiple processes and applications.
Core homogenizer accessories for bead mills, rotor stators, and automated homogenizers
Proper sample preparation is a critical component to the success of any downstream multi-omic and molecular readout in a research lab. Most labs will consider protocols and methods that not only facilitate standardization but also scales with their growing lab throughput.
Sample homogenization, an early stage of sample preparation, either right after sample collection and retrieval or after an extended storage time, is no exception to this best practice of process optimization.
Homogenizers should be versatile instruments, offering a wide range of throughput requirements and compatibility with multiple sample tube sizes, homogenizing mixes, and reagents. Our line of homogenizer accessories exist to support these need-driven ambitions. We strive to offer robust options for automation-compatible accessories, table-top bead mill accessories for the Omni Bead Ruptor Elite or Bead Ruptor 96, and rotor-stator accessories, not limited to generator probes, bead mill tube carriages, and tube and well-plate milling accessories for your homogenizers.
For research use only. Not for use in diagnostic procedures.
Explore our homogenizer accessories solutions
Featured resources
Filters
1 - 25 of 48 Products and Services
Processing Rack for Omni Prep Homogenizer
Cleaning Station for Omni Prep 96 Automated Homogenizer allows cleaning of hybrid and stainless steel probes.
Clean probe racks facilitate storage of clean 7 or 12 mm processing probes/Omni Tips on the deck of the Prep 96 until use during homogenization. To use a clean probe rack on the Prep 96, the Deck Adapter for Clean Probe/Tip Rack is required (51-BRA-1006-J02).
The disposal rack or chute provides the ability to dispose of used and dirty probes/tips following automated homogenization using the Prep 96.The deck adapter allows for fitment of the Dirty Probes/Tips Disposal Rack on the modular deck of the Prep 96 Automated Homogenizer.The disposal chute allows for disposal of used dirty probes/tips down the chute into a disposal bag via the left-hand side of the Prep 96 unit
SBS footprint sample racks allow the processing of samples in an automatable rack format on the Prep 96 Automated Homogenizer. To use SBS sample racks on the Prep 96, the Deck Adapters for SBS Sample Racks are required (51-HWA-23S1).
Passively cooled sample racks allow the processing of cooled samples on the Prep 96 Automated Homogenizer. To use a passively cooled sample rack on the Prep 96, the Deck Adapter for Standard Sample Racks is required (23-HWR-11-JA).
Standard sample racks allow the processing of samples on the Prep 96 Automated Homogenizer. To use a standard sample rack on the Prep 96, the Deck Adapter for Standard Sample Racks is required (23-HWR-11-JA).
The 2 mL Stainless Steel Lysing and Grinding Cryo Tubes provide a solution for processing extremely hard substrates or where a robust tube is required that can be frozen with liquid nitrogen to preserve thermally labile analytes.
Active Grinding Media (AGM) are suited for grinding applications where beads or balls do not provide sufficient processing. Maximize sample capacity in 30 or 50 mL tubes (up to 5 grams). AGM assists in the grinding of cannabis flowers and candies, enhancing the extraction of cannabinoids. AGM is also suitable for processing vitamin tablets, seeds, and other hard samples. AGM provides more significant particle size reduction than other methods for enhancing analyte recovery for any downstream analysis, such as LC-MS/MS.
Bead Ruptor 96 Stainless Steel Milling Balls for use in combination with Milling Jars
The 12 mm Omni Tip Hybrid Homogenizer Probes and shaft combine the convenience of disposable plastic probes with the durability of traditional stainless steel probes. Requires the use of A1000SB Omni Tip Adapter for use with the Omni Tissue Homogenizer (TH).
The 7 mm Omni Tip™ hybrid probes combine the convenience of disposable plastic probes with the durability of traditional stainless steel probes. Requires the use of A1000SB Omni Tip Adapter for use with the Omni Tissue Homogenizer (TH).
The 12 mm Omni Tip™ patented design significantly reduces the hassle of disassembly and maintenance of traditional stainless-steel generator probes. Proprietary Omni Tip probes are engineered from durable plastics and are economical enough to be disposed of after each use to significantly reduce cross contamination risk that can occur when processing multiple samples.
The Omni Tips™ patented design significantly reduces the hassle of disassembly and maintenance of traditional stainless steel generators. Proprietary Omni Tip probes are engineered from durable plastics and are economical enough to be disposed of after each use to significantly reduce cross contamination risk that can occur when processing multiple samples.
The Omni Tips™ patented design significantly reduces the hassle of disassembly and maintenance of traditional stainless steel generators. Proprietary Omni Tip probes are engineered from durable plastics and are economical enough to be disposed of after each use to significantly minimize cross contamination risk that can occur when processing multiple samples. Omni Tips offer a cost effective solution for researchers homogenizing samples where contaminants can affect downstream assays.
Quick Connect Assembly (QCA) For use with the Omni mixer/macro units.
Omni Prep ice trays can be added to the Omni Prep rack to help keep your samples cold.
Tube carriage holds 12 x 7 mL Skirted Screw Cap Tubes.
Compatible with 1.5 mL, 2 mL (24 position only), 7 mL, 30 mL, and 50 mL Tube Carriages. Requires separate purchase of the tube carriages.
Supports use of the Omni Tip™ disposable probes for use with Omni handheld units.
Motor Stand Assembly to support longer processing times.
Well Plate and Tube adapters allow the processing of alternative format consumables on the Bead Ruptor 96.
Tube carriage holds 24 x 2 mL or 0.5 mL Tubes.
Tool kit for Omni TH, THQ, Micro, and GLH rotor-stator homogenizer units.